AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy Tallahassee Homeowners Choose Lennox HVAC
We provide independent Lennox HVAC service in Tallahassee: repair, installation, and maintenance for the Lennox equipment you already own. What sets our Lennox work apart is familiarity. We see the same series in the same neighborhoods showing the same failures, so diagnosis starts from a known pattern instead of a blank page. We are not affiliated with, authorized by, or endorsed by Lennox. Our knowledge comes from hands-on work on the brand, not a factory badge. Whether your system is a Merit air conditioner in a midtown bungalow or a Signature furnace in a northeast subdivision, we work on the system you have. Call (844) 834-0157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust Ridgeway AC Repair for Your Lennox HVAC?
Lennox equipment has its own logic. Control boards talk to blower modules in ways that other brands don’t, and the heat pump line reverses and defrosts on schedules that surprise homeowners. Our technicians have up to 13 years of experience, and that time has been spent learning the specific quirks of the systems people actually have in Tallahassee. Nine brands, zero guesswork: we work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so a Lennox call isn’t a rare event we’re improvising through.
We use quality parts that fit Lennox equipment. For control boards, blower modules, and heat exchangers, fit and calibration matter, so we source parts built to the same specification as what came out. For capacitors, ignitors, and motors, a quality aftermarket part often does the job for less than an overpriced or discontinued original. We also keep warranty concerns in mind, and we’ll tell you plainly when a repair could affect coverage before we start. Ridgeway is a named company with its reputation on every job. No franchise number, no call center reading from a script.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Fix in Tallahassee
Tallahassee’s long cooling season is hard on any system, but Lennox equipment has recognizable failure patterns. Here’s what we see most often.
- Merit series condenser fan motors and capacitors. The ML14XC1 and ML16XC1 use PSC fan motors that commonly seize or run hot after 8 to 10 years. In a climate where the condenser runs for months on end, that motor and its run capacitor take a beating. A homeowner notices the outdoor unit running but the house not cooling, and the fan is spinning slowly or not at all. The usual cause is a failed capacitor or a seized motor, and both are repairable.
- Elite and Signature control boards and variable-speed blower modules. These throw communication errors or cause erratic fan behavior, often tied to voltage spikes or moisture collecting in the indoor unit. Tallahassee’s humidity finds its way into attic air handlers, and electronics don’t like it. When the board can’t talk to the blower, the system shuts down or runs in a strange pattern that looks like a refrigerant problem but isn’t.
- Heat pump reversing valves and defrost boards. Our mild but humid winters trip up Lennox heat pumps more than people expect. A reversing valve or defrost board that acts up can leave the system running in the wrong mode or stuck in defrost, so it heats when it should cool or blows cold when it should heat. These are control-and-valve problems, not refrigerant problems, and they need the right diagnosis.
- Older G60 and G50 furnace draft inducer motors and heat exchangers. A known Lennox pattern: the draft inducer motor fails or the secondary heat exchanger corrodes, tripping pressure switches and leaving the furnace short-cycling. A furnace that starts, runs briefly, and shuts down is often telling you one of these two things. The heat exchanger side of this is a safety matter, which is why we treat it seriously.
- Musty smells and water damage from attic air handlers. In older Tallahassee neighborhoods near downtown and around the universities, we often find 1970s-era air handlers with duct insulation that sweats heavily in summer humidity. That leads to mold-like staining on ceiling drywall, and the call starts as “musty smell” rather than “not cooling.” It’s a duct and drainage problem as much as a Lennox one.
Lennox Parts & Our Repair-vs-Replace Approach
The right fix, not the easiest upsell. When a Lennox system fails, we weigh the repair against the replacement honestly. For control boards, blower modules, and heat exchangers, we use parts built to the same specification as the original, because fit and calibration matter there. For capacitors, ignitors, and motors, a quality aftermarket equivalent often beats a discontinued or overpriced original. We don’t stock or carry genuine Lennox parts and we’re not a dealer; we source what fits your equipment when the job calls for it.
For systems past 15 years with a major component failure, the math gets tight. Lennox’s newer variable-speed equipment is efficient but costly to repair, so a mid-range Merit or Elite replacement is often the better value over the next decade. We’ll show you both sides. Call (844) 834-0157 for a free estimate and a straight answer.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We start with the symptom and work backward. On a Lennox system, that means checking the specific failure points first: capacitance and amp draw on a Merit condenser, communication status on an Elite or Signature board, defrost behavior on a heat pump. We don’t replace parts to see what happens.
- 2
Repair or install. Once we know the cause, you get a written estimate before any work starts. Repair means quality parts sized and calibrated for your Lennox equipment. Installation means a proper match to the home, not a one-size guess, because Tallahassee’s older ductwork and tighter subdivisions need different answers.
- 3
Test. After the repair, we verify refrigerant charge, airflow, and cycle behavior. On a heat pump, that includes confirming the reversing valve switches cleanly. A system that cools but shorts cycles isn’t fixed.
- 4
Warranty. We explain what your Lennox coverage does and doesn’t cover, and we note anything that could affect it before we touch the equipment, so there are no surprises later.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Tallahassee
We repair, install, and service the full range of Lennox residential equipment: central air conditioners across the Merit, Elite, and Signature lines, gas furnaces including the ML180, ML195, EL180, EL195, and SL280, heat pumps such as the XP16 and XP25, and ductless mini-splits including the MS8C1 and M22 Series. That covers the systems in most Tallahassee homes, from midtown bungalows with older G-series furnaces to newer construction in the northeast and east. We’re equipped for both cooling and heating under one roof, so you’re not hunting for a second contractor when the season turns. AC repair, heat pump repair, and furnace repair are all in-house.
We Also Service These Brands
No brand loyalty bias. Because we work on nine competing manufacturers, our recommendations are driven by what fits your home and budget, not a dealership incentive. Alongside Lennox, we service Carrier and Trane and six others, from premium tiers to value-tier systems. That breadth means honest guidance and one call for both seasons.

FAQs – Lennox HVAC Service in Tallahassee
No. We are an independent Lennox service provider, not authorized, sponsored, or endorsed by the manufacturer. Our expertise comes from hands-on work on the brand every week in Tallahassee, not a factory certificate.
Usually the capacitor or the condenser fan motor, not the compressor. On 8 to 12-year-old ML14XC1 and ML16XC1 units in this climate, a failed run capacitor or a seized PSC motor is the common cause. A qualified tech tests capacitance and amp draw, replaces the failed part, and verifies charge and airflow. Call (844) 834-0157 for an exact quote. Estimates are free.
A stuck defrost board or a misbehaving reversing valve is the usual reason. Our mild, humid winters can confuse the defrost logic, so the system stays in defrost or runs in the wrong mode. The fix is control-side, not a refrigerant top-off.
A failed heat exchanger is a safety concern because it can let combustion gases into the home, and it should be treated as urgent. Whether you repair or replace depends on age and the rest of the system. For a furnace past 15 years with a cracked heat exchanger, replacement is usually the smarter spend. Call (844) 834-0157 to schedule an assessment.
Merit series repairs tend to cost less because the parts are simpler (capacitors, PSC motors, basic boards). Elite and Signature systems involve variable-speed blower modules and more complex control boards, which cost more to replace. That’s worth weighing when a system is old and facing a major repair.
We use parts built to the same specification as the original for control boards, blower modules, and heat exchangers, where fit and calibration matter. For capacitors, ignitors, and motors, a quality aftermarket part often serves well. We don’t stock genuine Lennox parts.
Proper service by a qualified technician doesn’t void a Lennox warranty, but improper work or unapproved parts can affect coverage. We flag anything that could matter before we start, so you know where you stand.
Typical estimated ranges: AC repair $150 – $650, furnace repair $150 – $700, AC installation $3,500 – $7,500, and tune-ups $80 – $200. The written estimate sets the final price. Call (844) 834-0157 for a free estimate.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
Book Your Lennox Service in Tallahassee, FL
Your Lennox system deserves a technician who knows the brand’s failure points before opening the panel. We repair, install, and service Lennox equipment across Tallahassee, and we handle Carrier and Trane too. Call (844) 834-0157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Ridgeway AC Repair.